Matte PLA for Production

Polymaker for Production is a product line designed for heavy 3D printing users. We offer large spools, bulk pricing and high consistency batch to batch quality.

Matte PLA is a cost-effective PLA displaying the most important features to produce end products: - Matte surface for a smooth high quality print finish - Weather resistance, on par with ASA - Chemical resistance to all main solvents - Food safe filament as a first step to certify your final products

With all these features combined, Matte PLA is the ideal material for end use products which will be used in real world conditions: weather resistance, chemical resistance and the filament has already passed the food safety tests.

Parameter
Nozzle temperature	190 – 230 (℃)
Build surface treatment	PC and Texture PEI (Glue when needed)
Build plate temperature	25 - 60 (˚C)
Cooling fan	ON
Printing speed	60 - 150 (mm/s)
Retraction distance	1 - 3 (mm)
Retraction speed	20 - 40 (mm/s)
Closure Chamber	No Needed
Recommended support material	PolySupport™ and PolyDissolve™ S1
Drying setting	55˚C for 6h

Print Tips

There are no special requirements when you print with Draft PLA. You can print it on any printer in any setup.

• This material is standard PLA options and can print with standard PLA settings.

• Leave the cooling fan on at full blast for best surface quality.

FAQ

How is this weather resistant?

We tested the impact of accelerated weathering on the following mechanical properties:- Tensile Strength- Young's Modulus- Charpy Impact StrengthAccelerated Weathering settings:The fluorescent UV light exposure follows the standard ISO 4892.3 The type of UV light is UVA-340. The irradiance is 0.76W/m2 at 340 nm. The cycle is 102 min for UV only and 18 min for water spray. The black panel temperature is 63± 3 °C The total test time is 60days (720 cycles) equivalent to ~3+ years* *BYMICOM LABORATORIES: [Rule of thumb: acceleration factor was found to be: 21.5]

Is this food safe?

There is no certification for food safety with the FDA, but this material does have certifications for Europe.

Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 - Sensorial examination odour and taste test: PASS Test Method: With reference to DIN 10955: 2004

(EU) No 10/2011 and its amendment (EU) 2020/1245 Regulation - Specific migration of heavy metal: PASS Test Method: With reference to EN13130-1:2004, analysis was performed by ICP-OES and ICP-MS.

How is this chemically resistant?

Reference standard: ISO 175:2010 Methods of test for the determination of the effects of immersion in liquid chemicals

- Immersion temperature: 23±2˚C - Immersion period: 7 days - Test the mechanical properties before and after immersion - Resistance to the chemical: The mechanical properties* must maintain over 70% after 7 days immersion *Tensile Strength, Young's Modulus and Charpy Impact Strength

Tested Liquid Chemicals: - Water (pH=7) -> Result: RESISTANT - Household cleaners (stain remover) (pH=11) -> Result: RESISTANT - Household cleaners (sterilizer) (pH=4) -> Result: RESISTANT - Vinegar food grade (pH=4) -> Result: RESISTANT - Vinegar concentrate (pH=4) -> Result: RESISTANT - 75% alcohol (pH=6) -> Result: RESISTANT - Fertilizer nutrient solution (pH=6) -> Result: RESISTANT

Do you sell refills?

We are sorry but we do not sell refills at this time

Is this material recyclable?

Unfortunately there is no great answer for recycling PLA at this time. Our cardboard spools are biodegradable but there is no great way to recycle PLA at this time.

Printing Profiles